8x10 tilt snowmobile atv or raft trailer
hole in center of deck for ratchet straps for skis
heavy duty commercial grade trailers built for rough roads with premuim dexter ez lube axles.
order or call to see what is in stock ready for delivery today!!!!!!!!!!
Also great for ATVs , snowmobiles, construction materials, and fire wood and wood pellets, has stake pockets so you can build side racks.
THE BEST snowmobile TRAILER YOU CAN BUY !!!!!
No one, builds a better, stronger trailer than this.
Full 8' foot wide also available in 12' foot long.
Made with 3/8ths thick 3inch channel steel, fully welded, 3" channel cross supports and gusseted.
3" tube 3/16" thick with 3x2 a-frame supported tongue prevents tongue from breaking or bending when you hit something backing it up.
8' sub frame made from 3" channel ties into cross members (3'' inch channel) and welded to 5200 lb rated spring holders, with 3500lb springs.
swing lock jack with roller wheel set back 20" from front so you can still open your tailgate . I put these jacks on our 7000 gvw trailers also.
Due to problems that we have seen with 2000# axles, we only use a solid 3500 lb Dexter EZ lube axles, we use 3500# instead of 2000# axles because the have a bigger set of bearings than the 2000# axles so it means that they last longer. they also have a ez lube grease fitting on the hub for seasonal maintenance.
Full size 13" tires and wheels, trailer radials, not smaller 8' tires that turn faster and wear out bearings on highway. more ground clearance for getting over rocks and rolling over logs.
( I also sell them without tires and wheels if you want it cheaper or have tires yourself) also available with 15" wheels and tires
Custom 2 x 6.decking milled right here in Montana, stained with oil penetrating stain. Our deck boards fit in bolt down steel pockets for easy replacement in 20 years. Bolts don't go though decking( this causes decking to split over time due to flexing). also makes deck easy to remove for trailer painting or rhino lining in the future. (Also available undecked for discounted price, so if you want to install your own plywood that will rot out in a few years, or cough up big money and install trex decking)
2 coat of primer and 2-5coats Rustoleum brand Black paint, (also available unpainted if you have your own custom plans, rhino lining, truck color, or want to save a few bucks,)
tie down loop in rear center for locking down back of raft or atvs
10 steel stake pockets on sides and front for building side boards for enclosing or firewood racks.
plus 2 more stake pockets on tongue for strapping down ramps or securing front of raft.
I recommend this size, it holds a 12' -14' foot raft, or a 10' foot raft and a toolbox, it will also carry 2 ATV's.
video below is optional 12' legnths and 15"tires
